[-]
  
  
  
  
[-]
  
[-]
  
  
  
  
[-]
  
  
  
 
 
 
[-]
  
  
  
  
  
  
  
  
  
  
  
  
  
[-]
  
  
[-]
  
  
 
 
 
 
 
[-]
 [+]
 [+]
Updated on 10/10/2018
True Control Center Installation Guide
Post Installation Configuration of the Cireson Control Center
Direct link to topic in this publication:

Post Installation Configuration of the Cireson Control Center 

Now that the Cireson Control Center has been installed, there are a few post-installation configuration steps that need to be completed as detailed in this section.

To complete the Control Center post-installation configuration steps:

  1. Start a browser and connect to the Control Center (e.g. http://controlcenter-demo.creson.com).
  2. Click the Settings Menu () in the Application Header area and select Configuration Manager Settings.

  1. Verify the settings under both the Configuration Manager Server and Database Settings For Configuration Manager sections are configured correctly, correcting then saving them if required.

  1. Click the Settings Menu () in the Application Header area and select Service Settings.

  1. Click the Service Tasks tab.

  1. Select the required setting you wish to configure from the Tasks drop-down.

  1. Configure how often the Control Center should query the ConfigMgr database for the relevant data then click Save Changes.

The default frequencies are shown in the table below:

TaskDefault Frequency of Every…
Group1 hour
User20 minutes
Computer10 minutes
Software24 hours
DeploymentScope4 hours
  1. Repeat Steps 6 and 7 as required for the other objects you wish to configure.